Commercial Plywood-1

TECHNICAL PARAMETERS

Sheet sizes ：1220 × 2440 / 1250 × 2500 mm

Thickness：2.7–30 mm; ply count depends on use

Core：Poplar, eucalyptus, birch, hardwood, pine or mixed

Faces：Okoume, birch, pine, bintangor or natural veneer

Face grades：BB/BB, BB/CC, CC/CC, by visible-face need

Bond：Specify for dry, humid or exterior use

Surface：Sanded or unsanded to finishing process

Dimensional tolerance：To approved purchase specification

Emission：E0 / E1 options, tested by target market method

Inspection：Core voids, thickness and warp

Thickness tolerance：Thin ±0.2–0.3 mm; thick ±0.4–0.5 mm, by model

what is Commercial Plywood?

Commercial Plywood is standard, general-purpose plywood widely used in interior design, furniture making, and general carpentry.
Despite its professional-sounding name, "commercial" does not mean heavy-duty industrial grade; instead, it refers to the MR (Moisture Resistant) grade plywood intended for commercial and residential interior applications that do not involve continuous exposure to water.

How It's Made
  Veneer Layering: Made by bonding thin sheets of wood veneer (plies) together, with each adjacent layer's grain rotated by 90 degrees (cross-lamination) to increase strength and reduce warping.

  Core Materials: The core layers are typically made from softwoods or lightweight hardwoods like rubberwood, gurjan, eucalyptus, or poplar.
  Adhesives: Glued together using UF (Urea-Formaldehyde) resin or MUF (Melamine-Urea-Formaldehyde) resin. These glues provide decent resistance to interior humidity but are not fully waterproof.
  Decorative Faces: Finished with smooth outer veneers like birch, okoume, poplar, or bintangor for an even, paintable surface.

Common Uses
  Furniture Manufacturing: Cabinets, wardrobes, beds, bookshelves, desks, and sofa frames.
  Interior Fit-Outs: Wall paneling, false ceilings, partition walls, and door cores.
  Packaging and Packing: Heavy-duty shipping crates, boxes, and protective paneling.

Advantages
  Cost-Effective: Significantly cheaper than solid wood and water-resistant Marine Plywood.
  High Structural Stability: Cross-laminated plies resist splitting, warping, and shrinking better than natural timber.
  Good Screw-Holding Strength: Holds nails and screws much better than particleboard or MDF.
  Easy to Finish: Surfaces take paint, wood veneer, laminate, and varnish smoothly.